WS3910
The high gain active GPS antenna with SAW filter | WS3914
Our lowest current model, 2 mA active GPS antenna | WS3916
Low cost GPS antenna | WS3940
Glass Mount combined Active GPS and Cellular | WS3940-ULD
Embedded, Glass Mount combined Active GPS and Cellular | WS3942
Mag Mount combined Active GPS and Cellular | WS3950
WS3960
The high gain embedded patch antenna with optional ground plane | WS3954
WS3964
The low power embedded patch antenna with optional ground plane | WS3957
WS3967
The low price embedded patch antenna with optional ground plane | WS3977
Through-hole Mount GPS Antenna |
|
Low Cost GPS Antenna |
|
|
|
- Voltage range 2.7 - 5 V
- LNA 28 dB gain typical
- Low noise figure 1.5dB
- Great out-of-band signal rejection
- Magnet or screw mount
- Large range of connector types
- Value priced
|
WS3917 High Gain GPS Antenna
The WS3917 GPS antenna is a high value antenna with a wide voltage range, ideally suited to AVL and
telematics platforms for vehicle-mounted use. Using internal magnets or screw mount holes, the antenna
can be installed almost anywhere on a vehicle allowing great flexibility. The WS3917 antenna features a
high gain (28 dB) low noise amplifier and a SAW filter. With a wide range of connectors and 3 to 5 volt
operation, the antenna can be used with almost any GPS system available.
|
 |
|
|
- Automotive Navigation
- Fleet Management & Telematics
- Marine Navigation
- Asset Tracking
- Military Radio and Vehicle
- Law Enforcement
- Clock & Timing using GPS
|
 |
| temperature | -40c to +85c operating
-45c to +80c storage |
| humidity | 95% max (non condensing) |
| dimensions | 45mm x 51mm x 12mm
2.05" x 2.32" x 0.53" |
| weight | 120g (4.2 oz) |
| attachment methods: | Magnetic (5 lb lift-off force)
or permanent (pre-threaded for 3x M2.5 screws) |
| shock | Vertical axis 50G
Other axes 30G |
| vibration | 3 axis, sweep = 15 min
10 - 200 Hz log sweep: 3G |
| frequency | 1575.42 MHz |
| gain | @ 90° 3 dBic
@ 20° -2.0 dBic |
| polarization | Right Hand Circular |
| axial ratio | @ 90° 4 dB
@ 20° 6 dB |
| voltage | 2.7 - 5 VDC |
| current | 15 mA @ 5V, 9 mA @ 3.3V |
| cable | 1.5 DS-QEHV Shikoku Cable Co. Ltd. |
| cable length | 3 Metres (standard), other lengths optional |
| cable loss | 1.3 dB/m typical |
| connector | SMA standard
SMB, SMC, MCX, BNC, TNC optional |
| frequency | 1572.42 - 1578.42 MHz |
| output impedance | 50 Ohm |
| VSWR | 1.5:1 max (at connector) |
| gain | @ 3.3VDC: 28 dB (typical)
@ 5VDC: 30 dB (typical) |
| noise figure | 1.5 dB (typical) |
| out-of-band rejection |
+/- 15 MHz: 5 dB
+/- 20 MHz: 10 dB
+/- 30 MHz: 32 dB
+/- 40 MHz: 40 dB
|
|
|
|
 |
|
|
pdf data sheet