WS3910
The high gain active GPS antenna with SAW filter | WS3914
Our lowest current model, 2 mA active GPS antenna | WS3916
Low cost GPS antenna | WS3917
Low cost GPS antenna | WS3940
Glass Mount combined Active GPS and Cellular | WS3940-ULD
Embedded, Glass Mount combined Active GPS and Cellular | WS3942
Mag Mount combined Active GPS and Cellular | WS3950
WS3960
The high gain embedded patch antenna with optional ground plane | WS3954
WS3964
The low power embedded patch antenna with optional ground plane | WS3957
WS3967
The low price embedded patch antenna with optional ground plane | WS3977
Through-hole Mount GPS Antenna |
|
High Gain Permanent Mount GPS Antenna |
|
|
 
|
- Weather proof, all-plastic, non-corrosive enclosure
- ¾ inch thru-hole or bracket mount
- Voltage range: 2.7 to 5.5 V
- High gain: 40 dB (typical)
- Very low noise figure: 0.5dB
- Great out-of-band signal rejection
- 15 KV ESD circuit protection
- Fixed Timing & Positioning Applications
- WiMAX / Fixed Wireless Broadband
- Cellular Base Station
- Fleet Management & Telematics
- Marine Vessel Installations
|
WS3978 High Gain Permanent Mount GPS Antenna
The WS3978 high gain permanent mount GPS Antenna provides 40 dBs of gain and great high out-ofband rejection performance. It features a perfectly tuned custom ceramic patch element for maximum signal reception, ESD circuit protection, a very low noise (0.5 dB) 3 stage LNA circuit and a SAW filter, enabling the WS3978 to provide a reliable and clear GPS signal while minimizing loss-of-lock, even when conditions are less than ideal. Available in an all-plastic, non-corrosive low profile package for vehicle mount or with a cone-shaped radome cover for fixed installations, the WS3978 high gain permanent mount GPS Antenna is the optimum choice for GPS Tracking and Timing applications with long cable runs.
|
 |
| temperature | -40c to +85c operating
-45c to +85c storage |
| weather proof | IP67 |
| dimensions | WS3978: 60 mm dia. x 21 mm H
WS3978-DH: 65mm dia. x 44.4mm H |
| weight | 50g |
| housing | GE Lexan EXL9330, Colour BK1334
(other colours available) |
| mounting | ¾" thru-hole or bracket mount |
| connector | TNC jack connector
(flying-cable option also available) |
| shock | Vertical axis 50G, Other axes 30G |
| vibration | 3 axis, sweep = 15 min
10-200 Hz log sweep: 3G |
| Frequency | 1575.42 MHz |
| gain | @ 90° 3 dBic
@ 20° -2.0 dBic |
| polarization | Right Hand Circular |
| axial ratio | @ 90° 4 dB
@ 20° 6 dB |
| voltage | 2.7 to 5.5 VDC |
| current | 15mA |
| ESD circuit protection | 15KV |
| frequency | 1572.5 - 1578 MHz |
| output impedance | 50 Ohm |
| VSWR | 1.5:1 max (at connector) |
| gain | 40 dB (typical) |
| noise figure | 0.5 dB (typical) |
|
|
|
 |
|
|
pdf data sheet